 |
To create a pond and waterfall we would always suggest using a flexible liner such as Alfafol this gives you much more flexibility on the shapes you can create. To work out the size of liner you need there is a formula that should be applied: take your depth and multiply it by 2 and then add this number onto your length and onto your width giving you the size of the liner you will need. Or use our Calculator.
A natural looking stream can be easily created using Alfafol pond liner, natural rock, aggregates and a suitable pump such as Nautilus. Firstly a suitable sized hole should be dug i.e. 3 meters by 3 meters by 1 meter deep. This should then be lined with Eurofol fleece and then Alfafol pond liner. The edges can then be disguised with rocks, turf or paving. To construct the waterfall you should dig out a rough shape and place rocks up the sides and through the middle to create steps for the water to run off. These rocks can be cemented in if required. To add the finishing touch the entire waterfall should be decorated with aggregates such as cobbles, pebbles and boulders.
Shopping list of materials (to create a pool of 3mx3mx1m and a waterfall
- 5m x 5m Alfafol pond liner
- 31 square meters of Eurofol fleece
- 4m x 4m Alfafol waterfall liner
- Rockery stone (aprox. 1.5-2 tonnes)
- A selection of rock, turf or paving to disguise pond edges
- A mixed selection of aggregates to cover stream bottom
- A suitable pump e.g. Nautilus (see product pages on website)
|
|
