Small patio or garden water feature with foam effect fountain

Moving water can bring life into any garden and it is surprisingly easy to create. Firstly you should choose where it is to be sited. A hole should be excavated in the ground, to the required size and shape of the reservoir (water container).

Place the supplied Pebble Support Grid over the top of the reservoir. A hole in the centre of the grid can be cut (in many cases this is already pre-cut) , for the nozzle to protrude through.

The Water Feature Pump should now be placed in the reservoir, underneath the grid. The nozzle that would be most suitable is a Schaumsprudler 22-5K (Foaming jet) with an Aquarius 1500 to give a fountain height of around 45 cm. Pebbles, slate chippings or cobbles can now be placed on top of the grid as required.

Tip:  Do not run the pump until the reservoir is completely filled with water, otherwise you may damage or burn out the pump.

Shopping list

• Pre-moulded reservoir, such as the 1m Pebble Pool or an Architectural Reservoir.
• A Fountain pump e.g. an Aquarius 1500 or P4000 Remote Controlled Pump.
• A nozzle e.g. a Schaumsprudler 22-5K foaming nozzle.
• A selection of cobbles, slate chippings, pebbles or aggregate as desired, placed over the reservoir grid.
• Simple LED lights or Halogen Lighting can be added, to further enhance the feature during the evening.  The lighting can be 'snuggled' into the pebbles, to uplight the water jet if desired.

14 Day Money Back Guarantee

SIMPLY PLACE YOUR ORDER AND THEN CHOOSE HOW TO PAY: SECURE ON-LINE SITE, BY TELEPHONE OR BY CHEQUE.

ABSOLUTELY NO HIDDEN CHARGES OR EXTRAS. NONE