3 Membrane Mist Maker Kit

The 3 Membrane Mist Maker will provide a fog of misty water vapour on the surface of water and is perfect for use in ponds and water features. This product features 3 mist producing membranes and a water level sensor that will cut power to the mister in low water levels to prevent over-heating.

In good weather conditions you can expect an approximate mist coverage area of around 1.25 metres in diameter when using the 3 Membrane Mister. For optimum mist generation, mist makers should be installed between 25mm and 40mm below the surface of the water and the best results are achieved in windless conditions. The mister can also be suspended in optimum depth below the surface of the water using the supplied float.

This mist maker is supplied with a 3 membrane mist head, floatation ring, 5 metres of low voltage cable from pond mister to the supplied weatherproof 230v transformer and 2 metres of mains 230v cable from transformer to your wiring point.

230V Mains Input / 36V AC Voltage Output / 60 Watts.