<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xml:base="http://www.water-garden.co.uk" xmlns:dc="http://purl.org/dc/elements/1.1/">
    <channel>
        <title>Water Garden</title>
        <link>http://www.water-garden.co.uk/cat/1020/feed</link>
        <description><![CDATA[Stunning Water Features and Fountains for ponds lakes & gardens.  Water Garden supply OASE Pond Pumps, Pond Filters, Pond Liners & Pond Lights.]]></description>
        <language>en</language>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse (2 Piece)]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-2-piece</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	A piece of flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends (a pump must be installed at the other end). We recommend 1" (25mm) internal diameter hose is used. Any stages on the hose tail smaller than the diameter of pipe being used should be sawn off to prevent loss of flow. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	If you have an existing pond, the lowest ledge of the watercourse must overhang the pond edge so that all of the water makes its way back to the pond. The same rule applies if an underground water reservoir is being used. A pump will be required in the pond or reservoir to provide flow to the stream. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15119_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Mon, 1 Feb 2026 17:09:14 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5825 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse (2 Piece)]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-2-piece</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	A piece of flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends (a pump must be installed at the other end). We recommend 1" (25mm) internal diameter hose is used. Any stages on the hose tail smaller than the diameter of pipe being used should be sawn off to prevent loss of flow. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	If you have an existing pond, the lowest ledge of the watercourse must overhang the pond edge so that all of the water makes its way back to the pond. The same rule applies if an underground water reservoir is being used. A pump will be required in the pond or reservoir to provide flow to the stream. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15120_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Mon, 1 Feb 2026 17:09:14 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5825 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse (2 Piece)]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-drop-and-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	A piece of flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends (a pump must be installed at the other end). We recommend 1" (25mm) internal diameter hose is used. Any stages on the hose tail smaller than the diameter of pipe being used should be sawn off to prevent loss of flow. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	If you have an existing pond, the lowest ledge of the watercourse must overhang the pond edge so that all of the water makes its way back to the pond. The same rule applies if an underground water reservoir is being used. A pump will be required in the pond or reservoir to provide flow to the stream. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15113_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Mon, 1 Feb 2026 17:11:27 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5823 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse (2 Piece)]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-drop-and-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	A piece of flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends (a pump must be installed at the other end). We recommend 1" (25mm) internal diameter hose is used. Any stages on the hose tail smaller than the diameter of pipe being used should be sawn off to prevent loss of flow. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	If you have an existing pond, the lowest ledge of the watercourse must overhang the pond edge so that all of the water makes its way back to the pond. The same rule applies if an underground water reservoir is being used. A pump will be required in the pond or reservoir to provide flow to the stream. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15116_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Mon, 1 Feb 2026 17:11:27 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5823 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse (2 Piece)]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	A piece of flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends (a pump must be installed at the other end). We recommend 1" (25mm) internal diameter hose is used. Any stages on the hose tail smaller than the diameter of pipe being used should be sawn off to prevent loss of flow. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	If you have an existing pond, the lowest ledge of the watercourse must overhang the pond edge so that all of the water makes its way back to the pond. The same rule applies if an underground water reservoir is being used. A pump will be required in the pond or reservoir to provide flow to the stream. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15117_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Mon, 1 Feb 2026 17:12:51 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5824 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse (2 Piece)]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	A piece of flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends (a pump must be installed at the other end). We recommend 1" (25mm) internal diameter hose is used. Any stages on the hose tail smaller than the diameter of pipe being used should be sawn off to prevent loss of flow. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	If you have an existing pond, the lowest ledge of the watercourse must overhang the pond edge so that all of the water makes its way back to the pond. The same rule applies if an underground water reservoir is being used. A pump will be required in the pond or reservoir to provide flow to the stream. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15118_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Mon, 1 Feb 2026 17:12:51 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5824 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15134_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15135_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15136_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15137_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15138_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15139_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Stepped Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-stepped-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.15kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Right Bend Piece (60cm x 60cm x 13cm).
	
		1 x Polyurethane Faux-Slate Bottom Left Bend Piece (60cm x 60cm x 13cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 1,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15140_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5827 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15128_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15129_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15130_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15131_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15132_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15133_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Drop & Falls Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-drop-falls-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 3.8kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Drop Piece (64cm x 62cm x 18cm).
	
		1 x Polyurethane Faux-Slate Bottom Falls Piece (67cm x 57cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,000 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15141_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5826 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15121_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15122_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15123_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15124_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15125_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15126_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[Grey Spring & Overhang Watercourse Kit]]></title>
<link>http://www.water-garden.co.uk/prod/grey-2-piece-spring-and-overhang-watercourse-kit</link>
<description><![CDATA[
	This water feature is manufactured from Polyurethane Resin which offers the realistic look of natural slate, but is far lighter in weight at only 8.9kg combined, making it far easy to position the pieces by hand and without the need for lifting machinery that would be required to move real stone.

	Supplied with this product:

	
		1 x Polyurethane Faux-Slate Top Spring Piece (70cm x 98cm x 15cm).
	
		1 x Polyurethane Faux-Slate Bottom Overhang Piece (80cm x 105cm x 12cm).
	
		1 x 1” BSP Male Threaded Stepped Hose Tail with 20mm (3/4”) 25mm (1”) and 32mm (1¼”) Stages.
	
		1 x 80cm x 63cm x 38cm Water Reservoir and Steel Grid with Pump Access Hatch.
	
		1 x 5 Metre Length of 1" (25mm) Black Flexible Hose Pipe.
	
		1 x Compact 3000 Water Feature Pump.
	
		2 x 20mm - 32mm Stainless Steel Hose Clips.


	Installation Tips:

	The water feature needs to be positioned at a slight downward angle to assist gravity in directing the water down the cascade. The surface should be horizontally level to ensure the correct spread of water across the stream section. If additional support is required beneath the water feature to secure it at the desired angle, bricks or breeze blocks can serve this purpose if there is not a natural bank to use.

	When the male threaded hose tail is screwed in, it is recommended that PTFE tape is wrapped around the thread of the hose tail to prevent any leaking. There is a thin skin of flexible material covering the outlet hole directly opposite the hose tail. This material must be pierced or cut out entirely before the water feature can be operated.

	The flexible hose must be connected to the hose tail and secured with a stainless steel hose clip at both ends. The pump is installed in the water reservoir at the other end of the stream. To maximise the flow, we recommend that the 20mm (3/4") stage on the watercourse hose tail is sawn off before attaching the 25mm hose to the 25mm stage (middle stage) of the hose tail. The flexible hose can be buried or routed beneath the water feature to hide it.

	It is recommended that the flow direction of the stream is tested before finishing the water feature, so that adjustments to the position of the feature can be made if necessary. Testing can be done by gently pouring a bucket of water or directing a hose pipe down the stream to see if the water takes the intended path to the bottom. When running satisfactorily, the feature can be set in by backfilling around it with a sand/cement mix and/or soil so that it should not move from its final position.

	The water reservoir should be buried in the ground to conceal it from view, with the steel grid at ground level. The steel grid can be covered with a decorative stone aggregate to hide it from view. The lowest ledge of the watercourse must overhang the edge of the water reservoir so that all of the water makes its way back to the reservoir. The pump must be fully immersed underwater at the bottom of the water reservoir. The pump should be capable of delivering a minimum of 2,500 litres per hour at the head of the stream.]]></description>
<enclosure url="https://c889979.ssl.cf3.rackcdn.com/watergarden/uploads/prod_img/2_15142_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Wed, 3 Feb 2026 09:39:53 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">5658 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 2m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-2m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 2m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2m x 2.5m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	PondLess Waterfall Set Installation Infographic

	 

	 

	

	
		
			
				
					1. Aggregate / Stones*
			
			
				
					5. Stream Liner
			
		
		
			
				
					2. Pump
			
			
				
					6. Stream Underlay
			
		
		
			
				
					3. Flow Regulator
			
			
				
					7. 1" Hose
			
		
		
			
				
					4. Underground Reservoir
			
			
				
					8. Waterfall Outlet
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13129_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:09:20 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4655 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 2m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-2m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 2m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2m x 2.5m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	PondLess Waterfall Set Installation Infographic

	 

	 

	

	
		
			
				
					1. Aggregate / Stones*
			
			
				
					5. Stream Liner
			
		
		
			
				
					2. Pump
			
			
				
					6. Stream Underlay
			
		
		
			
				
					3. Flow Regulator
			
			
				
					7. 1" Hose
			
		
		
			
				
					4. Underground Reservoir
			
			
				
					8. Waterfall Outlet
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13130_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:09:20 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4655 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 2m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-2m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 2m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2m x 2.5m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	PondLess Waterfall Set Installation Infographic

	 

	 

	

	
		
			
				
					1. Aggregate / Stones*
			
			
				
					5. Stream Liner
			
		
		
			
				
					2. Pump
			
			
				
					6. Stream Underlay
			
		
		
			
				
					3. Flow Regulator
			
			
				
					7. 1" Hose
			
		
		
			
				
					4. Underground Reservoir
			
			
				
					8. Waterfall Outlet
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13153_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:09:20 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4655 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 3m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-3m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 3m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2.5m x 4m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	
		PondLess Waterfall Set Installation Infographic
	
		
	
		 
	
		
			
				
					
						1. Aggregate / Stones*
				
				
					
						5. Stream Liner
				
			
			
				
					
						2. Pump
				
				
					
						6. Stream Underlay
				
			
			
				
					
						3. Flow Regulator
				
				
					
						7. 1" Hose
				
			
			
				
					
						4. Underground Reservoir
				
				
					
						8. Waterfall Outlet
				
			
		
	
	
		*Stones and aggregate not included


	 ]]></description>
<enclosure url="/uploads/prod_img/2_13131_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:10:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4656 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 3m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-3m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 3m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2.5m x 4m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	
		PondLess Waterfall Set Installation Infographic
	
		
	
		 
	
		
			
				
					
						1. Aggregate / Stones*
				
				
					
						5. Stream Liner
				
			
			
				
					
						2. Pump
				
				
					
						6. Stream Underlay
				
			
			
				
					
						3. Flow Regulator
				
				
					
						7. 1" Hose
				
			
			
				
					
						4. Underground Reservoir
				
				
					
						8. Waterfall Outlet
				
			
		
	
	
		*Stones and aggregate not included


	 ]]></description>
<enclosure url="/uploads/prod_img/2_13132_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:10:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4656 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 3m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-3m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 3m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2.5m x 4m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	
		PondLess Waterfall Set Installation Infographic
	
		
	
		 
	
		
			
				
					
						1. Aggregate / Stones*
				
				
					
						5. Stream Liner
				
			
			
				
					
						2. Pump
				
				
					
						6. Stream Underlay
				
			
			
				
					
						3. Flow Regulator
				
				
					
						7. 1" Hose
				
			
			
				
					
						4. Underground Reservoir
				
				
					
						8. Waterfall Outlet
				
			
		
	
	
		*Stones and aggregate not included


	 ]]></description>
<enclosure url="/uploads/prod_img/2_13154_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:10:17 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4656 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 4m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-4m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 4m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2.5m x 5m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Aggregate / Stones*
			
			
				
					5. Stream Liner
			
		
		
			
				
					2. Pump
			
			
				
					6. Stream Underlay
			
		
		
			
				
					3. Flow Regulator
			
			
				
					7. 1" Hose
			
		
		
			
				
					4. Underground Reservoir
			
			
				
					8. Waterfall Outlet
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13133_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:11:45 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4657 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 4m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-4m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 4m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2.5m x 5m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Aggregate / Stones*
			
			
				
					5. Stream Liner
			
		
		
			
				
					2. Pump
			
			
				
					6. Stream Underlay
			
		
		
			
				
					3. Flow Regulator
			
			
				
					7. 1" Hose
			
		
		
			
				
					4. Underground Reservoir
			
			
				
					8. Waterfall Outlet
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13134_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:11:45 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4657 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 4m x 0.3m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-4m-x-0-3m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 4m x 0.3m Stream Includes:

	
		
			
				1 x PondoFall Waterfall Outlet
			
				1 x 2.5m x 5m Stream Liner
		
		
			
				1 x PondoMax 5000 Pump
			
				1 x 10m2 Stream Underlay
		
		
			
				1 x 5m x 1" Hose
			
				1 x 82x48x65cm Reservoir & 85x55cm Grid
		
		
			
				1 x 1" In-line Flow Regulator
			
				1 x Gold Label Pond Sealant - Black
		
		
			
				4 x SK19 Hose Clips
			
				1 x FoamFix Waterfall Foam- 700ml
		
	


	-

	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Aggregate / Stones*
			
			
				
					5. Stream Liner
			
		
		
			
				
					2. Pump
			
			
				
					6. Stream Underlay
			
		
		
			
				
					3. Flow Regulator
			
			
				
					7. 1" Hose
			
		
		
			
				
					4. Underground Reservoir
			
			
				
					8. Waterfall Outlet
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13155_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:11:45 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4657 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-1-waterfall-spring-15000-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall 5m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2.5m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 10m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13135_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:16:38 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4644 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-1-waterfall-spring-15000-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall 5m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2.5m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 10m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13136_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:16:38 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4644 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-1-waterfall-spring-15000-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall 5m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2.5m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 10m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13156_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:16:38 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4644 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-0-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 20m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13141_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:25:15 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4648 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-0-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 20m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13142_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:25:15 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4648 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-0-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 20m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13159_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:25:15 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4648 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-0-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2m x 15m Stream Liner
			
			
				
					1 x 15m x 2" Hose
			
		
		
			
				
					1 x 30m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13147_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:41:36 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4651 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-0-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2m x 15m Stream Liner
			
			
				
					1 x 15m x 2" Hose
			
		
		
			
				
					1 x 30m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13148_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:41:36 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4651 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 0.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-0-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 0.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 15000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST20000 Pump
			
		
		
			
				
					1 x 2m x 15m Stream Liner
			
			
				
					1 x 15m x 2" Hose
			
		
		
			
				
					1 x 30m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13162_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:41:36 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4651 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-5m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 5m x 1m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 22500
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST25000 Pump
			
		
		
			
				
					1 x 2m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 10m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13137_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:21:42 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4646 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-5m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 5m x 1m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 22500
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST25000 Pump
			
		
		
			
				
					1 x 2m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 10m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13138_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:21:42 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4646 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-5m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 5m x 1m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 22500
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST25000 Pump
			
		
		
			
				
					1 x 2m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 10m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13157_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:21:42 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4646 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 1m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 22500
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST25000 Pump
			
		
		
			
				
					1 x 2m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 20m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13143_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:26:38 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4649 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 1m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 22500
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST25000 Pump
			
		
		
			
				
					1 x 2m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 20m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13144_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:26:38 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4649 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 1m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 22500
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x ST25000 Pump
			
		
		
			
				
					1 x 2m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 20m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13160_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:26:38 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4649 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 1m Stream Includes:

	
		
			
				
					
						6 x Maxima Blocks
				
				
					
						1 x 2" Union Hosetail
				
			
			
				
					
						1 x Pump Vault 60000
				
				
					
						1 x Pump Vault Extension
				
			
			
				
					
						1 x 4m x 5m Reservoir Liner
				
				
					
						1 x Watercourse Spring 22500
				
			
			
				
					
						1 x 20m2 Reservoir Underlay
				
				
					
						1 x ST25000 Pump
				
			
			
				
					
						1 x 2m x 15m Stream Liner
				
				
					
						1 x 15m x 2" Hose
				
			
			
				
					
						1 x 30m2 Stream Underlay
				
				
					
						2 x SK50 Hose Clips
				
			
			
				
					
						1 x Gold Label Pond Sealant - Black
				
				
					
						1 x FoamFix Waterfall Foam- 700ml
				
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13149_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:44:08 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4652 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 1m Stream Includes:

	
		
			
				
					
						6 x Maxima Blocks
				
				
					
						1 x 2" Union Hosetail
				
			
			
				
					
						1 x Pump Vault 60000
				
				
					
						1 x Pump Vault Extension
				
			
			
				
					
						1 x 4m x 5m Reservoir Liner
				
				
					
						1 x Watercourse Spring 22500
				
			
			
				
					
						1 x 20m2 Reservoir Underlay
				
				
					
						1 x ST25000 Pump
				
			
			
				
					
						1 x 2m x 15m Stream Liner
				
				
					
						1 x 15m x 2" Hose
				
			
			
				
					
						1 x 30m2 Stream Underlay
				
				
					
						2 x SK50 Hose Clips
				
			
			
				
					
						1 x Gold Label Pond Sealant - Black
				
				
					
						1 x FoamFix Waterfall Foam- 700ml
				
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13150_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:44:08 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4652 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 1m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-1m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 1m Stream Includes:

	
		
			
				
					
						6 x Maxima Blocks
				
				
					
						1 x 2" Union Hosetail
				
			
			
				
					
						1 x Pump Vault 60000
				
				
					
						1 x Pump Vault Extension
				
			
			
				
					
						1 x 4m x 5m Reservoir Liner
				
				
					
						1 x Watercourse Spring 22500
				
			
			
				
					
						1 x 20m2 Reservoir Underlay
				
				
					
						1 x ST25000 Pump
				
			
			
				
					
						1 x 2m x 15m Stream Liner
				
				
					
						1 x 15m x 2" Hose
				
			
			
				
					
						1 x 30m2 Stream Underlay
				
				
					
						2 x SK50 Hose Clips
				
			
			
				
					
						1 x Gold Label Pond Sealant - Black
				
				
					
						1 x FoamFix Waterfall Foam- 700ml
				
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13163_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:44:08 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4652 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-5m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 5m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 16m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13139_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:43:11 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4647 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-5m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 5m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 16m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13140_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:43:11 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4647 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 5m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-5m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 5m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 5m Stream Liner
			
			
				
					1 x 5m x 2" Hose
			
		
		
			
				
					1 x 16m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13158_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:43:11 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4647 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 30m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13145_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:37:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4650 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 30m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13146_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:37:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4650 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 10m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-10m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 10m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 10m Stream Liner
			
			
				
					1 x 10m x 2" Hose
			
		
		
			
				
					1 x 30m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13161_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 16:37:37 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4650 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 15m Stream Liner
			
			
				
					1 x 15m x 2" Hose
			
		
		
			
				
					1 x 48m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13151_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:47:18 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4653 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 15m Stream Liner
			
			
				
					1 x 15m x 2" Hose
			
		
		
			
				
					1 x 48m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13152_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:47:18 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4653 at http://www.water-garden.co.uk</guid>
</item>
<item>
<title><![CDATA[PondLess Waterfall Set - 15m x 1.5m Stream]]></title>
<link>http://www.water-garden.co.uk/prod/pondless-waterfall-set-15m-x-1-5m-stream</link>
<description><![CDATA[
	PondLess Waterfall Set 15m x 1.5m Stream Includes:

	
		
			
				
					6 x Maxima Blocks
			
			
				
					1 x 2" Union Hosetail
			
		
		
			
				
					1 x Pump Vault 60000
			
			
				
					1 x Pump Vault Extension
			
		
		
			
				
					1 x 4m x 5m Reservoir Liner
			
			
				
					1 x Watercourse Spring 35000
			
		
		
			
				
					1 x 20m2 Reservoir Underlay
			
			
				
					1 x AquaMax Eco Expert 36000
			
		
		
			
				
					1 x 3m x 15m Stream Liner
			
			
				
					1 x 15m x 2" Hose
			
		
		
			
				
					1 x 48m2 Stream Underlay
			
			
				
					2 x SK50 Hose Clips
			
		
		
			
				
					1 x Gold Label Pond Sealant - Black
			
			
				
					1 x FoamFix Waterfall Foam- 700ml
			
		
	


	PondLess Waterfall Set Installation Infographic

	

	 

	
		
			
				
					1. Reservoir Underlay
			
			
				
					6. Pump
			
		
		
			
				
					2. Reservoir Liner
			
			
				
					7. Stream Underlay
			
		
		
			
				
					3. Aggregate*
			
			
				
					8. Stream Liner
			
		
		
			
				
					4. Maxima Blocks
			
			
				
					9. 2" Hose
			
		
		
			
				
					5. Pump Chamber
			
			
				
					10. Water Course Spring
			
		
	


	*Stones and aggregate not included]]></description>
<enclosure url="/uploads/prod_img/2_13164_s.jpg" type="image/jpeg" />
<category domain="http://www.water-garden.co.uk/cat/water-features/designs/streams-waterfalls">Streams &amp; Waterfalls</category>
<pubDate>Fri, 5 Jun 2026 14:47:18 +0000</pubDate>
<dc:creator>Water Garden</dc:creator>
<guid isPermaLink="false">4653 at http://www.water-garden.co.uk</guid>
</item>
</channel>
</rss>