T-Type Pump Technical Data Ideal Pumps For:  Water Features, Waterfalls, Water Cascades, Streams Flow rates from 450 Litres/Hour up to 30,000 Litres/Hour

T-Type Pump Model T450 T1000 T2000 T4000 T8000 T10000 T12000 T15000 T20000 T25000 T30000 Flow Rate Q max (L/Hour) 450 1,000 2,000 4,000 8,000 10,000 12,000 15,000 20,000 25,000 30,000 Delivery head H max. (metres) 0.65m 1.7m 3.0m 4.0m 4.0m 4.5m 5m 6.5m 7.5m 8.0m 8.0m Power consumption (watts) 5w 16w 45w 99w 125w 135w 175w 290w 400w 520w 660w Power Supply 230 volt 1 phase 50 Hertz Cable length 10 metres Dimensions LxWxH (cm) 6x5x7 9x8x9 12x8x11 14x10x13 30x17x18 42.5x19.5x20 Outlet connection 8/12mm 1/2" BSPF 3/4" BSPF 1" BSPM 1 1/2" BSPM Inlet Connection N/A 1 1/4" BSPM 2" BSPM In-built Flow Regulator Yes No Asynchronous Motor No Yes Solids Handling Capability N/A Up to 6mm Dry Mountable (Flooded Suction) No Yes Guarantee 2 Years Part Number  T450P T1000P T2000P T4000P T8000P T10000P T12000P T15000P T20000P T25000P T30000P

'BSPF' = British Standard Pipe Thread - FEMALE Threaded connection

'BSPM' = British Standard Pipe Thread - MALE Threaded connection

'Flooded Suction' = Pump can be dry installed out of water but the pump and the pump inlet MUST be positioned below the water level, so that the pump is constantly flooded with water.  Flooded suction pumps CANNOT be mounted above the water level, as they are not able to pull a vacuum).

'In-built Flow Regulator' = Certain pumps feature a means of mechanical adjustment of the water flow.  Pumps which do not feature a flow regulator can be fitted with a range of Flow Regulators or Water Distributors.  Click here to view our range of Flow Regulators.

'Asynchronous Motor' = The Pump can be electronically regulated via simple connection to an appropriate device (click to view the Weatherproof Remote Controllers department). By electronically regulating the pump, the water flow can be reduced or increased.  Furthermore, by decreasing the water flow on an asychronous pump, the electrical consumption will also be reduced.  Non-Asychronous (synchronous) pumps can be mechanically regulated only.

Performance Charts for T-Type Water Feature / Fountain Pumps

'BSPF' = British Standard Pipe Thread - FEMALE Threaded connection

'BSPM' = British Standard Pipe Thread - MALE Threaded connection

'Flooded Suction' = Pump can be dry installed out of water but the pump and the pump inlet MUST be positioned below the water level, so that the pump is constantly flooded with water.  Flooded suction pumps CANNOT be mounted above the water level, as they are not able to pull a vacuum).

'In-built Flow Regulator' = Certain pumps feature a means of mechanical adjustment of the water flow.  Pumps which do not feature a flow regulator can be fitted with a range of Flow Regulators or Water Distributors.  Click here to view our range of Flow Regulators.

'Asynchronous Motor' = The Pump can be electronically regulated via simple connection to a remote variable speed electrical device (see Outdoor Remote Controllers). By electronically regulating the pump, the water flow can be reduced or increased.  Furthermore, by decreasing the water flow on an asychronous pump, the electrical consumption will also be reduced.  Non-Asychronous (synchronous) pumps can be mechanically regulated only.

Performance Chart for Cascademax Waterfall Pumps

Atlantis 200 Technical Data