The 1 ½” Galvanised Steel Pipe Riser is a 200mm elongated pipe nipple with 1 ½” BSP male threads at both ends.

These steel pipes can be used to create rigid risers between fountain pumps and fountain nozzles, to elevate the fountain nozzle to the water surface. These pipes can be used singly, or coupled together with 1 ½” BSP Female Sockets to create longer risers. The Galvanised Steel Riser provides a solid, stable support for heavier steel, brass or cast bronze fountain nozzles that require more strength in support than a plastic threaded riser can provide. For flow control, Threaded Ball Valves can be used between risers.

This riser will screw directly into the inlet of these fountain nozzles:

• Cascade 70T Fountain Nozzle
• Diamond Jet Nozzle - 20 Water Jets
• High Jet Fountain Nozzle - 19mm Bore
• Gushing Nozzle 115 - 15 Silver
• Fan Jet Fountain Nozzle
• 2 Tier Rotating Fountain Nozzle - 17 Water Jets
• Fountain Spray Bar - 10 Outlets
• 2400mm Spray Ring and 3000mm Spray Ring

1 ½” BSP Male threads measure approximately 48mm (1.89”) across the outer diameter.