1 1/2 inch Tank Connector

The 1 1/2" BSP Male Threaded Tank Connector is well suited for connecting a flexible pond hose through a water tank, reservoir or fibreglass pond with rigid, thin wall sides.  The use of some 1 1/2" BSP Female Hosetails will allow hose to be directly mounted to the Tank Connector, making this ideal for passing water flow above or below water level via a pump or under gravity.  The Tank Connector can be used as a pond or reservoir overflow if needed (ideally when connected to a Tin Can Strainer or Fine Mesh Strainer to prevent leaves from blocking the hole as the water exits).

• Black Polyethylene, BSP male threaded with two rubber gaskets.
• Suggested drilling diameter:  Ø49-52mm
• Outer Flange diameter:  Ø65mm
• Maximum wall thickness for clamping:  13mm