Need advice on this product?
Speak to one of our experts today 02392 373735
The Plug & Play Air Source Heat Pump is the ideal partner for pop-up pools and above ground swimming pools up to 15,000 Litres (15m3). The super-efficient, compact heater consumes only 680 watts but will deliver an impressive 2200-3100 watts of energy to heat your swimming pool.
Even on the warmest of summer days in the UK, jumping into an unheated pool is the reserve of the brave. Conventional electric heaters can be very expensive to run, until now. Air source heat pumps utilise the natural surrounding air which is absorbed into a fluid, then compressed to increase its temperature which in turn is used to heat the passing pool water. This clever technology means that you can obtain up to 5 times the amount of energy than you are putting into the heater.
The Plug & Play Air Source Heat Pump has a very compact footprint of only H36cm x W31cm x D30cm. We recommend that a solar pool cover is used when the pool is not in use to help retain heat. If your pool pump has a greater flow than the recommended 2000L/Hour flow rate for the heater, flow should be bypassed to the heater with the remaining flow passed back to the pool directly. The heat pump should be installed after the filtration system, to prevent debris entering the heat pump. For full installation details, please view the instructions PDF below.