Pool Heat Pump – Plug & Play 3.1Kw

The Plug & Play Air Source Heat Pump is the ideal partner for pop-up pools and above ground swimming pools up to 15,000 Litres (15m3).  The super-efficient, compact heater consumes only 680 watts but will deliver an impressive 2200-3100 watts of energy to heat your swimming pool.

Even on the warmest of summer days in the UK, jumping into an unheated pool is the reserve of the brave.  Conventional electric heaters can be very expensive to run, until now.  Air source heat pumps utilise the natural surrounding air which is absorbed into a fluid, then compressed to increase its temperature which in turn is used to heat the passing pool water.  This clever technology means that you can obtain up to 5 times the amount of energy than you are putting into the heater.

• Suggested water flow rate:  2000L/Hour (water pump not supplied).
• Pool Water Volume:  5m3 – 15m3.
• 32mm (1 ¼”) Male Hosetail Connections (in/out).
• Power Consumption (running):  Approx. 680 watts.
• Max. Power Consumption:  Approx. 950 watts.
• Output Power:  Up to 3100 watts.
• Max. Current:  4.7 Amps.
• 220-240V AC / Single Phase Supply.
• H36cm x W31cm x D30cm.