Need advice on this product?
Speak to one of our experts today 02392 373735
Triple Bubbler Patio Water Feature
-
£1,250.00 inc. VAT
£1,041.67 exc. VAT
Additional Information
Technical Info
Technical Info
Assembly Instructions.
- Place the water reservoir tub on a flat and level surface.
- Place the pump inside the base of the reservoir and feed the power cable through one of the reservoir lid perimeter holes.
- Connect the hose to the pump outlet and onto the 3-way distributor. Shorten the hose as required so that the pump is raised and suspended slightly from the base of the reservoir.
- Pass the LED lighting cables though one of the top lid perimeter holes so both the pump and lighting cables are on the top of the lid.
- Connect the 3 way lighting splitter to the lighting cables and connect to the transformer.
- Position the transformer and light cables close to the outside of the reservoir base.
- Connect the pump mains cable to a weatherproof switchbox or socket.
- Connect the lighting transformer mains cable to a weatherproof switchbox or socket.
- Fill the reservoir with clean water and test the pump and LED lights for operation.
- Apply the adhesive feet to the base of the decorative surround in 4 equal spaced positions. This will allow the electrical cables to pass under the surround.
- Lower the decorative surround over the top of the reservoir.
- Place the decorative stones onto the top lid and raise or lower the height of the bubble jet nozzle so this is protruding just below the pebble surface level, ensuring the jet hole is not covered.
- Tidy any cabling from view, sit back and enjoy your new water feature.
 |
Triple Bubbler Patio Water Feature |
| Buy it now |
![Helpful info]()
Find out moreHelpful info
Making things easier
Use our helpful information section to assit you on buy and maintaning your products.
