600mm Curved Cascade Water Blade Kit

The 600mm Curved Cascade Water Blade Kit is a 170mm tall Stainless Steel water feature complete with water pump, flexible hose and fittings.

This stylish stainless steel curved water feature is designed to be fixed on level ground at the edge of a pond or water reservoir and reach in over the side. As the feature fills, a tranquil waterfall cascade pours from the 600mm wide outlet.

There is an inlet on the underside of the water feature which the flexible hose is connected to via a hose tail screwed into the female threaded inlet. The water pump connects to flexible hose at the other end, and there is a flow regulator valve that can be fitted anywhere on the hose pipe to regulate the speed of the water coming through the Curved Cascade water feature to alter the effect and sound.

The base of the water feature has a flange bracket on either side with laser cut screw holes. These allow the water feature to be fixed to a hard, flat surface such as wooden decking at the side of a pond, or secured to a water reservoir grid.

Our 79cm x 48cm x 30cm Reservoir & 85cm x 55cm Steel Grid Combination is well-suited if the water feature is being installed over a reservoir rather than at the side of a garden pond. The water feature can be secured to the grid on both sides.