Grey Spring & Overhang Watercourse Kit

Stacked two-piece polyurethane resin spring and overhang watercourse kit complete with water reservoir and grid, pump, flexible hose and clips.

Supplied in 2 separate pieces, arranged with the upper spring section cascading down onto the lower overhang piece, this delightful, realistic, faux-slate garden water feature measures approximately 110cm in length and 105cm in width, with an assembled height of 27cm. The Spring weighs 4.3kg, and the Overhang 4.6kg.

The upper spring piece features a water outlet hole with a stepped hose tail connector at the rear on the right for attaching the flexible hose pipe. The lower overhang piece should be placed beneath the ledge of the upper piece, with the reservoir buried beneath the lower overhang to capture and recirculate the water.

The rectangular water reservoir measures 80cm x 63cm and is 38cm deep, containing 150 litres of water. The steel grid covers the open reservoir and can support up to 150kg of aggregate on top. The Compact 3000 water feature pump provides the ideal flow rate for the watercourse and has a flow regulator should you wish to slow the stream down. A 5 metre length of 1” (25mm) internal diameter black flexible hose is supplied, with 2 stainless steel hose clips to secure the hose to the water feature and the pump at both ends.