Need advice on this product?
Speak to one of our experts today 02392 373735
£2,491.80 inc. VAT
£2,076.50 exc. VAT
Our PondLess Waterfall Sets are the perfect addition to any outdoor space and allow you to create beautiful, natural looking features.
Our PondLess Waterfall Set 15m x 1m will create up to a 15m long waterfall and includes everything you will need to construct your ideal feature. The PondLess Waterfall Set 15m x 1m includes the Oase Maxima Blocks and Pump Chamber for the pond free structure and a Watercourse Spring 22500 that are all designed to be used together to create either a bespoke smooth and relaxing watercourse or a more dramatic multi-level water fall.
PondLess features are simple to operate and require less maintenance than typical ponds as all equipment is hidden and doesn't require an open pool of water. If flow control is required an optional 2" in-line flow regulator can be purchased separately.
|8 x Maxima Blocks||2 x 2" Union Hosetail|
|1 x Pump Vault 55000 + Extension||1 x 4m x 5m Reservoir Liner|
|1 x Watercourse Spring 22500||1 x 20m2 Reservoir Underlay|
|1 x ST25000 Pump||1 x 2m x 15m Stream Liner|
|1 x 15m x 2" Hose||1 x 30m2 Stream Underlay|
|2 x SK50 Hose Clips||1 x Gold Label Pond Sealant - Black|
|1 x 2" - 1 1/2" Reducing Bush||1 x Waterfall Foam - 12oz x 2|
1. Reservoir Underlay
2. Reservoir Liner
7. Stream Underlay
8. Stream Liner
4. Maxima Blocks
9. 2" Hose
5. Pump Chamber
10. Water Course Spring
*Stones and aggregate not included
Pondless Waterfalls are easy to install, low maintenance features that are designed to integrate into your garden or outdoor space to create an attractive, tranquil or exciting waterfall feature without the need for an exposed pool of water. Pondless cascades work by creating an underground reservoir that is filled with load bearing Maxima Blocks and a pump chamber covered over with rocks, stones or aggregate. This will allow the flow of water from the waterfall to disappear into the ground to then be recirculated back to the top of the feature by a pump located in the reservoir. Pond free Waterfall features work best and look most attractive when the waterfall spillway is positioned higher than the reservoir and the stream is decorated with larger rocks, steps and plants to create a truly breath-taking, bespoke water feature.
The reservoir area of the Pond-free Waterfall feature is created by digging a hole in the ground L1.4m x W1.4m x D0.8m in size and lining it with our heavy duty protective underlay and a flexible, waterproof EPDM pond liner. This will create a waterproof area that will be filled with water to be pumped up the top of the feature and recirculated back down the waterfall. After lining the reservoir it will be filled with the included Maxima Blocks and pump chamber which will create a structure within the reservoir comprised of around 96% empty space for water volume. The pump chamber will provide a clear area for the pump to be located and will prevent any debris (leaves, rocks etc.) from being sucked into the pump. Once the interior structure has been constructed stones and aggregate (not included) can be placed on top to disguise everything.
A Pond free Waterfall uses two liners with protective underlay to waterproof the feature, one liner with underlay for the reservoir area and one liner with underlay for the water course. These two liners will overlap and seal where the watercourse and reservoir meet and the watercourse liner will be attached and sealed to the rear of the spillway outlet to create a single long liner that will keep the flow of water within the boundaries of the feature.
Our Pondless Waterfall kits include an appropriately sized pump for each size of waterfall feature and are designed to house the pump in the chamber inside of the lined reservoir area to circulate the flow of water from the reservoir, up to the top of the feature, to then flow back down and recirculate again. Our Pondless Waterfall Kits are also supplied with a WaterCourse Spring outlet that will be installed at the top of the feature and connected to the pump using the included 2" flexible hose. The Watercourse Spring will tranquilise and disperse the turbulent flow of water across the width of the watercourse, allowing it to flow smoothly and consistently down the feature without splashing or overrunning. The WaterCourse Spring component can be hidden within the landscaping with rocks or pebbles to disguise and give the illusion the feature is fed by a natural spring.
Our range of Pond-free Waterfall features are supplied with all fittings and accessories you will need to build your feature including hose connections, threaded fittings, liner adhesive and expanding waterfall foam to ensure the watercourse is watertight and secure.
Our Pondless Waterfall Reservoir area must be dug to a size of L1.4m x W1.4m x D0.8m.
PondLess Waterfall Set - 15m x 1m Stream
|Buy it now|