Need advice on this product?
Speak to one of our experts today 02392 373735
£575.69 inc. VAT
£479.74 exc. VAT
Our PondLess Waterfall Sets are the perfect addition to any outdoor space and allow you to create beautiful, natural looking features.
Our PondLess Waterfall Set 2m x 0.3m will create up to a 2m long waterfall and includes everything you will need to construct your ideal feature. The PondLess Waterfall Set 2m x 0.3m includes an 80 x 63cm Water Feature Reservoir & Grid and a PondoFall Waterfall Outlet that are all designed to be used together to create either a bespoke smooth and relaxing watercourse or a more dramatic multi-level water fall pond free feature.
PondLess features are simple to operate and require less maintenance than typical ponds as all equipment is hidden and doesn't require an open pool of water.
|1 x PondoFall Waterfall Outlet||1 x 2m x 2.5m Stream Liner|
|1 x PondoMax 5000 Pump||1 x 10m2 Stream Underlay|
|1 x 5m x 1" Hose||1 x 80 x 63cm Water Feature Reservoir & Grid|
|1 x 1" In-line Flow Regulator||1 x Gold Label Pond Sealant - Black|
|4 x SK19 Hose Clips||1 x Waterfall Foam- 12oz x 2|
1. Aggregate / Stones*
5. Stream Liner
6. Stream Underlay
3. Flow Regulator
7. 1" Hose
4. Underground Reservoir
8. Waterfall Outlet
*Stones and aggregate not included
Pondless Waterfalls are easy to install, low maintenance features that are designed to integrate into your garden or outdoor space to create an attractive, tranquil or exciting waterfall feature without the need for an exposed pool of water. Pondless cascades work by installing an underground reservoir that is covered over with rocks, stones or aggregate. This will allow the flow of water from the waterfall to disappear into the ground to then be recirculated back to the top of the feature by a pump located in the reservoir. Pond free Waterfall features work best and look most attractive when the waterfall spillway is positioned higher than the reservoir and the stream is decorated with larger rocks, steps and plants to create a truly breath-taking, bespoke water feature.
The reservoir area of the Pond-free Waterfall feature is created by digging a hole in the ground L0.8m x W0.63m x D0.38m in size and then sinking the underground reservoir into the hole. This will create a waterproof area that will be filled with water to be pumped up the top of the feature and recirculated back down the waterfall. The reservoir will provide a clear area for the pump to be located and will prevent any debris (leaves, rocks etc.) from being sucked into the pump. Once the reservoir and grid structure has been installed, stones and aggregate (not included) can be placed on top to disguise everything.
A Pond free Waterfall uses liners with protective underlay to waterproof the feature, these liners will overlap and seal where the watercourse and reservoir meet and the watercourse liner will be attached and sealed to the rear of the spillway outlet to create a single long liner that will keep the flow of water within the boundaries of the feature.
Our Pondless Waterfall kits include an appropriately sized pump for each size of waterfall feature and are designed to house the pump inside the reservoir area to circulate the flow of water from the reservoir, up to the top of the feature, to then flow back down and recirculate again. Our Pondless Waterfall Kits are also supplied with a PondoFall Waterfall Outlet that will be installed at the top of the feature and connected to the pump using the included 1" flexible hose. The Waterfall Outlet will tranquilise and disperse the turbulent flow of water across the width of the watercourse, allowing it to flow smoothly and consistently down the feature without splashing or overrunning. The Waterfall Outlet component can be hidden within the landscaping with rocks or pebbles to disguise and give the illusion the feature is fed by a natural spring.
Our range of Pond-free Waterfall features are supplied with all fittings and accessories you will need to build your feature including hose connections, threaded fittings, liner adhesive and expanding waterfall foam to ensure the watercourse is watertight and secure.
PondLess Waterfall Set - 2m x 0.3m Stream
|Buy it now|